|
|
 |
|
Alpol AP 400
Underlay floor between 20 and 100 mm
class CT-C20-F4
For floor finish, pressure layers, profiling slopes and as an underlay for self-levelling floors. Thickness range: between 20 and 100 mm. Can be used on a capping layer (min. 30 mm thick), as cement solid (min. 20 mm thick) or floating screed, e.g. on a thermal insulation course (min. 40 mm thick). In underfloor heating systems, the minimum layer thickness above a heating component is also 30 mm. Intended for interior and exterior use.
|
|
|
Alpol AP 410
Quick-setting floor applied floor between 5 and 35 mm
class CT-C30-F7
For quick setting flow applied flooring from 5 to 35 mm thick, inside buildings. Can be used with electric underfloor heating systems. If this is the case, the minimum layer thickness should be 25 mm. Provides an ideal underlay for thin-layer, self-levelling floors and any types of ceramic and stone cladding. Can also be used in rooms exposed to periodical moisture (bathrooms, kitchens, cellars, garages).
|
|
|
|
Alpol AP 420
Self-levelling, thin-layer floor between 2 and 10 mm
class CT-C20-F7
For self-levelling, thin-layer levelling screeds on concrete and cement surfaces, before fixing any floor covering: PVC tiles and flooring, panels, carpet and cork flooring, ceramic tiles etc. Intended for interior and exterior use.
|
|
|
|
Alpol AP 421
Self-levelling, thin-layer, quick-setting floor, between 2 and 10 mm
class CT-C35-F7
For quick setting, self-levelling, thin-layer levelling screeds on concrete and cement surfaces, before fixing any floor covering: PVC tiles and flooring, panels, carpet and cork flooring, ceramic tiles etc. Intended for interior and exterior use.
|
|
|
|
Alpol AP 450
Anhydrite flow applied floor, between 2 and 10 mm
class CA-C30-F6
For machine or manual application of flow applied flooring 25 to 60 mm thick. Depending on the application, the minimum thickness of ALPOL AP 450 anhydrite floor should be: solid underlay – 25 mm; underlay on a separating layer – 30 mm, flowing underlay – 35 mm, underlay in underfloor heating system – 25 mm above the heater, respectively. Provides an ideal underlay for thin-layer, self-levelling floors and any types of ceramic and stone cladding. Intended for interior and exterior use.
|
|
|
|
Alpol AP 460
Self-levelling, thin-layer, gypsum floor, between 2 and 10 mm
class CA-C20-F6
For quick setting, self-levelling, thin-layer levelling screeds on anhydrite, concrete and cement surfaces. With a perfect smooth finish, the floor is especially recommended for any types of floor covering: carpet, PVC, cork flooring, ceramic tiles, parquets, mosaics, and as a top coat for electric underfloor heating systems. Intended for interior and exterior use.
|
|
|
|
|
|
