 |
|
Alpol AT 300
Grey cementlime plaster mortar for manual application
type GP, W0, class CS I
For manually applied plaster coatings of surface class III and CS I compressive strength, on walls and ceilings, regardless of humidity inside rooms. Recommended plaster coating thickness up to 15 mm. Provides ideal underlay for finish coat, decorative plaster and ceramic lining. Granularity up to 1.6 mm.
|
|
|
Alpol AT 301
Grey cement-lime plaster mortar for machine application
type GP, W0, class CS I CS I
For machine-applied plaster coatings of surface class III and CS I compressive strength, on walls and ceilings, regardless of humidity inside rooms. Trowelled with Styrofoam float provides an excellent underlay for ceramic lining, finish coat, decorative plaster and paint. Recommended plaster coating thickness: 10 mm when applied on ALPOL AT 303 underlay plaster. Thickness of both coats should not exceed 20 mm. The plaster can also be applied manually. Granularity up to 1.6 mm.
|
|
|
|
Alpol AT 302
Grey cementlime thin-coat plaster mortar for machine application
type GP, W0, cat. CS I
For machine-applied thin-coat plaster coatings of surface class III and CS I compressive strength, on walls and ceilings, regardless of humidity inside rooms. Recommended as a topcoat for multi-layer plasterwork. Finished smooth, it provides an excellent underlay for wallpapers, paint, finish coat and decorative plaster. Recommended plaster coating thickness: between 2 and 5 mm. The plaster can also be applied manually. Granularity up to 0.5 mm.
|
|
|
|
Alpol AT 303
Grey underlay plaster mortar for machine application
type GP, W2, class CS IV
For machine application of scratch coat of CS IV compressive strength, for cement, cement and lime and lime plaster coatings, inside and outside buildings. Also recommended as an underlay for ALPOL AT 300, ALPOL AT 301, ALPOL AT 302, ALPOL AT 310 or ALPOL AT 311 plasters. The plaster can also be applied manually. Granularity up to 1.6 mm.
|
|
|
|
Alpol AT 304
White lightweight lime plaster mortar for machine application
type LW, W0, class CS I
White thin-coat interior plaster coatings of surface class III and CS I compressive strength. Recommended especially for walls made of absorbing silicate materials and cellular concrete without the need of priming or applying scratch coat, and as a finish coat on underlay plaster. Finished smooth with a Styrofoam or sponge float provides excellent underlay for paint, without the need of stopping. Maximum plaster coating thickness: 5 mm. The plaster can also be applied manually. Granularity up to 0.4 mm.
 Золотая медаль Budma 2001
|
|
|
|
Alpol AT 305
White lightweight cement-lime plaster mortar for machine application
type LW, W0, class CS I
For machine-applied white interior plaster coatings of surface class III and CS I compressive strength. Recommended especially for walls made of absorbing silicate materials and cellular concrete without the need of priming or applying a scratch coat. Recommended plaster coating thickness: between 10 and 15 mm. Can also be applied manually. Provides good underlay for finish coat and paint. Granularity up to 1.6 mm.
|
|
|
|
Alpol AT 306
Grey cementlime lightweight plaster mortar – for machine application
type LW, W0, class CS II
For machine-applied white interior plaster coatings of surface class III and CS II compressive strength. Recommended especially for walls made of absorbing silicate materials and cellular concrete without the need of priming or applying a scratch coat. Recommended plaster coating thickness: between 10 and 15 mm. Can also be applied manually. Provides a good underlay for finish coat and paint. Granularity up to 1.0 mm.
|
|
|
|
Alpol AT 307
Lime finish coat
type GP, W0, class CS I
For application of finish coats on 1 to 3 mm thick lime, lime and cement and cement plaster, and on concrete surfaces inside buildings. Excellent for refreshment of old, stable plasterwork. Requires no priming. For wet manual trowelling, no need of sanding. Provides an excellent underlay for paint or wallpapers. Can be used as a finish coat on walls in rooms of increased air humidity. Granularity up to 0.25 mm.
|
|
|
|
Alpol AT 310
Grey cement - lime plaster mortar for manual application
type GP, W2, class CS IV CS II
For manually-applied external and internal plaster coatings of surface class III and CS II compressive strength. Recommended for coating walls, ground floor, foundations and plinths. Trowelled rough, provides ideal underlay for decorative plaster and ceramic lining. Granularity up to 1.6 mm.
|
|
|
|
Alpol AT 311
Grey cement - lime plaster mortar for machine application
type GP, W2, class CS IV CS II
For machine-applied internal and external plaster coatings of surface class III and CS II compressive strength, on walls and ceilings, regardless of humidity inside rooms. Trowelled with Styrofoam float, provides an excellent underlay for ceramic lining, finish coat, decorative plaster and paint. Recommended plaster coating thickness: approx. 10 mm. The thickness of both coats, applied on ALPOL AT 303 underlay plaster, should not exceed 20 mm. The plaster can also be applied manually. Granularity up to 1.6 mm.
|
|
|
|
Alpol AT 312
White cement - lime plaster mortar for machine application
type GP, W2, class CS I
For machine-applied white internal and external plaster coatings of surface class III and CS I compressive strength. Recommended especially for walls made of absorbing silicate materials and cellular concrete without the need of priming or applying scratch coat. Recommended plaster coating thickness approx 10 mm. Can also be applied manually. Depending on the finish method various textures can be obtained, e.g. sandy, rubbed, smooth. Provides an excellent underlay for façade paint or decorative mineral plaster. Granularity up to 1 mm.
|
|
|
|
Alpol AT 315
White limeweight cement - lime plaster mortar for machine application
type LW, W2, class CS II
For machine-applied white internal and external plaster coatings of surface class III and CS II compressive strength. Recommended especially for walls made of absorbing silicate materials and cellular concrete without the need of priming or applying scratch coat. Recommended plaster coating thickness: between 10 and 15 mm. Can also be applied manually. Provides good underlay for decorative plaster and paint. Granularity up to 1.0 mm.
|
|
|
|
Alpol AT 316
Grey cement - lime limeweight plaster mortar for machine application
type GP, W2, class CS II
For manually-applied external and internal plaster coatings of surface class III and CS II compressive strength. Recommended especially for walls made of absorbing silicate materials and cellular concrete without the need of priming or applying scratch coat. Recommended plaster coating thickness: between 10 and 15 mm. Can also be applied manually. Provides good underlay for decorative plaster and paint. Granularity up to 1.6 mm.
|
|
|
|
Alpol AT 320
White mineral dashed plaster
1.5 mm
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermo insulating systems using Styrofoam or ALPOL EKO PLUS WM using mineral wool). The plaster coating can be painted with ALPOL AF 640, ALPOL AF 660 or ALPOL AF 680 façade paint.
|
|
|
|
Alpol AT 321
White mineral pitted plaster
2 mm
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermo insulating systems using Styrofoam or ALPOL EKO PLUS WM using mineral wool). The plaster coating can be painted with ALPOL AF 640, ALPOL AF 660 or ALPOL AF 680 façade paint.
|
|
|
|
Alpol AT 322
White mineral pitted plaster
3 mm
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermo insulating systems using Styrofoam or ALPOL EKO PLUS WM using mineral wool). The plaster coating can be painted with ALPOL AF 640, ALPOL AF 660 or ALPOL AF 680 façade paint.
|
|
|
|
Alpol AT 325
Ultra-white mineral pebble dash plaster
1.5 mm
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermo insulating systems using Styrofoam or ALPOL EKO PLUS WM using mineral wool). The plaster coating can be painted with ALPOL AF 640, ALPOL AF 660 or ALPOL AF 680 façade paint.
|
|
|
|
Alpol AT 326
Ultra-white mineral pebble dash plaster
2 mm
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermo insulating systems using Styrofoam or ALPOL EKO PLUS WM using mineral wool). The plaster coating can be painted with ALPOL AF 640, ALPOL AF 660 or ALPOL AF 680 façade paint.
|
|
|
|
Alpol AT 327
Ultra-white mineral pebble dash plaster
2.5 mm
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermo insulating systems using Styrofoam or ALPOL EKO PLUS WM using mineral wool). The plaster coating can be painted with ALPOL AF 640, ALPOL AF 660 or ALPOL AF 680 façade paint.
|
|
|
|
Alpol AT 330
Grey mineral dashed plaster
1.5 mm
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermo insulating systems using Styrofoam or ALPOL EKO PLUS WM using mineral wool). The plaster coating can be painted with ALPOL AF 640, ALPOL AF 660 or ALPOL AF 680 façade paint.
|
|
|
|
Alpol AT 331
Grey mineral pitted plaster
2 mm
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermo insulating systems using Styrofoam or ALPOL EKO PLUS WM using mineral wool). The plaster coating can be painted with ALPOL AF 640, ALPOL AF 660 or ALPOL AF 680 façade paint.
|
|
|
|
Alpol AT 332
Grey mineral pitted plaster
3 mm
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermo insulating systems using Styrofoam or ALPOL EKO PLUS WM using mineral wool). The plaster coating can be painted with ALPOL AF 640, ALPOL AF 660 or ALPOL AF 680 façade paint.
|
|
|
|
Alpol AT 350-352
Acrylic dashed plaster
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermal insulation system). Available as white or integrally coloured according to ALPOL COLOR pattern book.
|
|
|
|
Alpol AT 356-358
Acrylic pitted plaster
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermal insulation system). Available as white or integrally coloured according to ALPOL COLOR pattern book.
|
|
|
|
Alpol AT 370-372
Silicate and silicone dashed plaster
For decorative thin-coat internal and external plaster coating (e.g. for ALPOL EKO PLUS thermal insulation systems using Styrofoam or ALPOL EKO PLUS WM using mineral wool). Available as white or integrally coloured according to ALPOL COLOR pattern book.
|
|
|
|
Alpol AT 376-378
Polysilicate plaster, pitted finish
For application decorative, thin-layer plasters in the styrofoam-based or mineral wool-based thermal insulation systems. White or through-coloured according to the ALPOL COLOR colour charts.
|
|
|
|
Alpol AT 390-391
Natural mosaic plaster
For decorative thin-coat internal and external plaster coating. Recommended especially for decorating walls in heavy foot traffic areas such as: staircases, hallways and corridors and building facades: upstands, attached piers and cornices. Available colours according to ALPOL MOSAIC swatch RODOS pallet.
|
|
|
|
Alpol AT 396-397
Coloured mosaic plaster
For decorative thin-coat plaster coating inside buildings. Recommended especially for decorating walls in heavy foot traffic areas such as: staircases, hallways and corridors. Available colours according to ALPOL MOSAIC swatch HIUMA pallet.
|
|
