 |
|
Alpol AZ 101
Lime and cement masonry mortar
class M 2,5 / type G
Conventional general-purpose mortar for construction of walls made of bricks, concrete and ceramic blocks, and other masonry components inside buildings. Recommended for all masonry work, except for structural walls. Joint thickness should not exceed 20 mm.
|
|
|
Alpol AZ 102
Lime and cement masonry mortar
class M 5 / type G
Conventional general-purpose mortar for construction of walls made of bricks, concrete and ceramic bricks and other masonry components inside buildings. Joint thickness should not exceed 20 mm.
|
|
|
|
Alpol AZ 103
Cement masonry mortar
class M 10 / type G
Conventional general-purpose mortar for construction of walls made of bricks, concrete and ceramic blocks and other masonry components subjected to high load. Joint thickness should not exceed 20 mm. Intended for interior and exterior use.
|
|
|
|
Alpol AZ 104
Cement masonry mortar
class M 15 / type G
Conventional general-purpose high-strength mortar for construction of walls and components subjected to high load inside and outside buildings, for filling and concrete repairs. Joint thickness should not exceed 20 mm.
|
|
|
|
Alpol AZ 110
Thin-layer mortar for silicate blocks, white
class M 10 / type T
For thin-joint mortaring loadbearing and partition walls from bricks and silicate blocks. For indoor and outdoor use. Thickness of joint: from 1 to 3 mm.
|
|
|
|
Alpol AZ 111
Thin-layer strong masonry mortar for silicate blocks, white
class M 15 / type T
For construction of bricks and silicate blocks with thin joint (especially for structural walls subjected to heavy load). Intended for interior and exterior use. Joint thickness between 1 and 3 mm.
|
|
|
|
Alpol AZ 115
Thin-layer masonry mortar for cellular concrete blocks, grey
class M 10 / type T
For construction of walls made of cellular or keramsite concrete blocks. Can also be used for bonding other absorbing masonry components. Intended for interior and exterior use. Joint thickness between 1 and 3 mm.
 Golden medal Budma 2001
|
|
|
|
Alpol AZ 116
Thin-layer masonry mortar for cellular concrete blocks, white
class M 10 / type T
For construction of walls of light –coloured cellular concrete blocks. Can also be used for bonding other absorbing wall components. Intended for interior and exterior use. Joint thickness between 1 and 3 mm.
|
|
|
|
Alpol AZ 117
Thin-layer masonry mortar (winter) for cellular concrete/silicate blocks, white
class M 15 / type T
For construction of walls made of cellular concrete blocks, bricks and silicate blocks with thin joint. Intended for interior and exterior use. Joint thickness between 1 and 3 mm. Especially recommended for masonry works in light winter condition in air temperature close to 0°C.
|
|
|
|
Alpol AZ 120
Clinker nanomortar, graphite
class M 10 / type G
Coloured mortar for bonding walls of face bricks with jointing at the same time, and for construction of fencing, foundations, wells, structural walls and chimney of clinker bricks inside and outside buildings. The mortar can also be used for grouting joints up to 30 mm wide, between bricks and façade tiles. Thanks to the use of nano-additives, the mortar is highly resistant to salt mist.
|
|
|
|
Alpol AZ 121
Clinker nanomortar, grey
class M 10 / type G
Coloured mortar for bonding walls of face bricks with jointing at the same time, and for construction of fencing, foundations, wells, structural walls and chimney of clinker bricks inside and outside buildings. The mortar can also be used for grouting joints up to 30 mm wide, between bricks and façade tiles. Thanks to the use of nano-additives, the mortar is highly resistant to salt mist.
|
|
|
|
Alpol AZ 122
Clinker nanomortar, brown
class M 10 / type G
Coloured mortar for bonding walls of face bricks with jointing at the same time, and for construction of fencing, foundations, wells, structural walls and chimney of clinker bricks inside and outside buildings. The mortar can also be used for grouting joints up to 30 mm wide, between bricks and façade tiles. Thanks to the use of nano-additives, the mortar is highly resistant to salt mist.
|
|
|
|
Alpol AZ 123
Clinker nanomortar, red
class M 10 / type G
Coloured mortar for bonding walls of face bricks with jointing at the same time, and for construction of fencing, foundations, wells, structural walls and chimney of clinker bricks inside and outside buildings. The mortar can also be used for grouting joints up to 30 mm wide, between bricks and façade tiles. Thanks to the use of nano-additives, the mortar is highly resistant to salt mist.
|
|
|
|
Alpol AZ 124
Clinker nanomortar, light grey
class M 10 / type G
Coloured mortar for bonding walls of face bricks with jointing at the same time, and for construction of fencing, foundations, wells, structural walls and chimney of clinker bricks inside and outside buildings. The mortar can also be used for grouting joints up to 30 mm wide, between bricks and façade tiles. Thanks to the use of nano-additives, the mortar is highly resistant to salt mist.
|
|
|
|
Alpol AZ 125
Clinker nanomortar, black
class M 10 / type G
Coloured mortar for bonding walls of face bricks with jointing at the same time, and for construction of fencing, foundations, wells, structural walls and chimney of clinker bricks inside and outside buildings. The mortar can also be used for grouting joints up to 30 mm wide, between bricks and façade tiles. Thanks to the use of nano-additives, the mortar is highly resistant to salt mist.
|
|
|
|
|
Alpol AZ 126
Clinker nanomortar, sand
class M 10 / type G
Coloured mortar for bonding walls of face bricks with jointing at the same time, and for construction of fencing, foundations, wells, structural walls and chimney of clinker bricks inside and outside buildings. The mortar can also be used for grouting joints up to 30 mm wide, between bricks and façade tiles. Thanks to the use of nano-additives, the mortar is highly resistant to salt mist.
|
|
|
|
Alpol AZ 130
Quick-setting mortar
class M 15 / type G
For rapid repairs of building structures: concrete, reinforced concrete and masonry structures, inside and outside building. For treating damages of mineral plaster and repairs of cement underlay and floors. Due to high strength and short setting time, the mortar is suitable for setting bolts in foundations, columns in bell footing, and for masonry works in lower temperatures (above 0°C).
|
|
|
|
Alpol AZ 131
Fixing mortar
class M 15 / type G
For quick grouting of balustrades, fencing posts, foundation bolts and other steel, concrete and reinforced concrete components. For patching small damages in concrete components, cement underlay and floors, as well as for repairs of building concrete and reinforced concrete structures. Intended for interior and exterior use.
|
|
|
|
Alpol AZ 135
Levelling mortar
class M 15 / type G
For levelling any types of substrates to be tiled and for profiling slopes and pressure layers. Joint thickness should not exceed 50 mm. Can be used for patching damages in concrete, reinforced concrete and masonry structures, mineral plaster and repairs of cement underlay and floors. Intended for interior and exterior use.
|
|
|
|
Alpol AZ 142
Brick adhesive
class M 2,5 / type L
For construction of walls made of various bricks and ceramic blocks, cellular concrete blocks and other masonry components, wherever thermal bridges must be removed. Intended for interior and exterior use. Joint thickness between 10 and 20 mm.
|
|
|
|
Alpol AZ 145
Glass brick adhesive, white
class M 10 / type G
For construction and jointing walls of glass bricks. Intended for interior and exterior use. Joint thickness between 10 and 15 mm.
|
|
